- Dirt Town map making turns physics-based dirt simulation into playable terrain art.
- Survey first: plan routes, mark high and low spots before any machine touches soil.
- Cut and fill: excavate high ground and reuse surplus soil to level low areas.
- Iterate constantly: dirt settles, piles slump, and every pass reshapes the map.
- Co-op scales it: up to 4 players can shape separate track sectors in parallel.
Dirt Town Map Making Fundamentals
Map making in Dirt Town is built entirely on the game's core strength: a physics-based dirt manipulation system. Unlike map editors with brush tools and snap grids, every feature on your map — every berm, jump, trench, and road — is the physical result of what you excavate, haul, and place with real construction machinery. The ground reacts to your machines: fill settles, piles slump, and shaped features can be reworked at any time.
That means the map making workflow follows the same rhythm as the game's core loop: move dirt, clear obstacles, collect resources, construct, and refine.
The table below breaks the map making process into its five practical stages:
| Stage | Goal | Key Machinery | Output |
|---|---|---|---|
| Survey | Plan route, mark cut/fill zones | None (on foot or vehicle) | Marked layout |
| Excavation | Cut high ground, dig features | Excavator / digger | Soil surplus, trenches |
| Hauling | Move dirt, gravel, debris | Dump truck | Material where needed |
| Shaping | Grade, level, sculpt features | Dozer / grader | Finished terrain profile |
| Refinement | Test, adjust, polish | Any machine | Playable map |
Because terrain is fully deformable, there is no "undo" in the traditional sense — but nothing is permanent either. Fill can be re-dug, jumps can be flattened, and roads can be re-graded. Treat map making as a loop of build, test, adjust rather than a one-pass edit.
Planning Your Map: Survey Before You Dig
The most common map making mistake is starting the excavator before planning the route. A planned layout saves you from re-digging sections later, which matters because every cubic meter of dirt you move takes real machine time.
Route Planning Checklist
Walk or drive the site first and identify three things:
| Terrain Feature | What to Look For | Action |
|---|---|---|
| High spots | Hills, ridges blocking the route | Mark for cutting down |
| Low spots | Valleys, dips, soft ground | Mark for filling with surplus soil |
| Obstacles | Large rocks, debris, blockages | Mark for clearing before laying material |
For road maps, plan the gentlest practical grade between endpoints — cut high ground and fill low ground until the base is even. For dirt bike tracks, plan the opposite: deliberately place jumps, rollers, and berms where the natural terrain supports them, using existing hills as jump faces where possible.
Large rocks and debris must be cleared before laying road material. A road bed built over obstacles will shift and protrude as the surface is compacted, ruining the finish and forcing a rebuild.
Choosing a Map Concept
Road Map
- Level, smooth profile
- Cut-and-fill grading
- Gravel surface layer
- Income-driven project
Dirt Bike Track
- Jumps, berms, rollers
- Carved flow lines
- Uses natural hills
- Test-ride every feature
Terrain Sandbox
- Freeform sculpting
- Trenches, mounds, dams
- Water physics experiments
- Pure creative building
Step-by-Step: Building a Map from Raw Terrain
This workflow uses the officially demonstrated construction mechanics — excavation, hauling, spreading, shaping — applied to map making. Each stage flows into the next, so keep the dig-truck cycle running without idle gaps.
Survey and mark the layout
Decide where the road or track runs. Mark high spots to cut, low spots to fill, and rocks to clear. A five-minute survey saves hours of rework.
Excavate along the route
Use the digger to cut high ground and dig planned features. The physics system means dirt piles up and settles as you work — set surplus soil aside for filling low areas.
Clear rocks and debris
Remove obstacles from the route bed so the surface rests on stable ground. Skipping this step is the fastest way to a broken road.
Haul and spread material
Load gravel with the digger, haul it with the dump truck, dump along the route, and spread evenly. For tracks, haul fill soil to jump and berm locations instead.
Shape and finish the surface
Grade the road level and smooth, or carve berms, rollers, and jump faces for a track. Each machinery pass visibly refines the terrain.
Test and iterate
Drive the route. Fill settles and shaped features shift under use — re-grade, re-cut, and refine until the map rides exactly the way you want.
Physics-based dirt means the map is never locked. Test-riding your track or road and adjusting problem sections is not a workaround — it is the intended map making loop in Dirt Town.
Co-op Map Making: 4-Player Workflow
Map making scales dramatically in Dirt Town's online co-op for up to four players. Instead of swapping between machines solo, each operator specializes in one stage of the pipeline.
| Role | Machine | Responsibility |
|---|---|---|
| Excavator | Digger | Cut high ground, dig features, load trucks |
| Hauler | Dump truck | Move soil and gravel to where it's needed |
| Clearer | Dozer / loader | Clear rocks, debris, and blockages |
| Finisher | Grader / roller | Shape and compact the final surface |
For large projects like dirt bike tracks, divide the site into sectors — each player levels and shapes one section of the route, then the crew connects sections and smooths transitions together. Keep communication open so haulers know when the excavator has a full pile ready, and the finisher knows when the base layer is set.
Four-player online co-op construction is the officially announced multiplayer scope. Features like matchmaking with strangers, cross-platform play, or competitive modes should be treated as awaiting confirmation until the developer demonstrates them.
Map Making Milestones
Work through this checklist as you build your first map. Each milestone builds on the previous one, matching the natural progression from raw terrain to a finished, rideable layout.
Map Making Milestones:
- Survey site and mark cut, fill, and obstacle zones
- Excavate high ground and stockpile surplus soil
- Clear all rocks and debris from the route bed
- Haul and spread gravel or fill material
- Shape and finish the road or track surface
- Test-ride the full route and refine problem sections
FAQ
Q: Is Dirt Town map making done with an editor tool or with machines?
With machines. Dirt Town has no traditional map editor — all map making happens through the physics-based dirt manipulation system, using excavators, trucks, dozers, and graders to physically reshape the terrain.
Q: Can I undo changes to the terrain?
There is no undo button, but nothing is permanent. Dirt can be re-dug, filled areas can be re-excavated, and shaped features can be re-graded, so map making works as a continuous build-test-adjust loop.
Q: How does map making work in multiplayer?
Up to four players can work the same site in online co-op. Split roles by machine — excavator, hauler, clearer, and finisher — or divide large tracks into sectors so each player shapes a section in parallel.
Q: What is the difference between building a road and a dirt bike track?
Roads aim for a level, even, compacted profile using cut-and-fill grading and a gravel surface. Dirt bike tracks deliberately carve jumps, berms, and rollers, often using natural hills as jump faces, and require repeated test rides to tune each feature.
Related guides: For the full construction workflow, see our Dirt Town Road Building and Terrain Guide, and grab the free Dirt Town Demo on Steam (released November 13, 2026) to practice terrain shaping before Early Access arrives on December 4, 2026.